How to Sharpen a Table Saw Blade in Australia?

Table saws are usually used for heavy-duty work and their blades tend to get dull very often. Now, this does not mean that you go and get yourself a newer one, instead of getting a new one or taking your blade to a workshop to get it sharpened, learn how to sharpen your blade yourself. This will save you a lot of money as well as a lot of time.

Before doing anything, what you need to do is ensure that your blade has become dull as soon as possible because if you wait too long, the blade can get irreversible damage and might not be able to get sharpened again.

Requirements:

You will require a diamond saw blade; you will mount it on your table saw and use it to sharpen your dull blade.

Wear proper safety equipment and take complete care while operating any power tool.

Clean both the blades carefully before performing the process on them to get rid of any unwanted nuisance.

Step 1:

Take the dull blade out of the table saw and securely mount the diamond saw blade into the table saw.

Step 2:

Align the dull saw blade in line with the diamond saw blade and mark the first teeth that you are going to sharpen so that you can keep track.

Step 3:

Now, start the diamond saw blade and slowly bring the dull blade towards it. Make sure that the spinning diamond blade touches the inside of the dull blade’s tooth, the part which is covered by a layer of carbide.

Step 4:

Carefully sharpen the entire tooth and repeat the entire process with other teeth until you circle back to the marked tooth.

If your dull blade has all the teeth pointing in the same direction, you will only need to make a single rotation, but if they are facing opposite directions, you will have to make a rotation for both sides.

Step 5:

Ensure that all the teeth have been sharpened. Now, remove the diamond saw blade from the table saw, but clean it carefully before putting it away. Keep a lookout for small metal and carbide dust that can scratch, rust, and damage it.

Step 6:

Now put the newly sharpened table saw blade back into its position and test it out on material. If it cuts smoothly without any resistance, it has been properly sharpened.

Conclusion:

You can follow these steps to sharpen your table saw blade in Australia and give it a long life by taking proper care of it. Constantly look out for rust or carbide dust between the teeth. These small things may seem insignificant, but they have a huge effect on the performance of your machine.

Don’t forget to give us your valuable feedback regarding the “How to Sharpen a Table Saw Blade in Australia” topic. You could also ask us questions about the main topic and we’d be more than happy to help you out.

Leave a Comment